8. USING THE ROTARY DIAL (STARTING FROM
MENU):
Select “Menu” on the rotary dial and navigate using the function buttons.
= Scroll up = Scroll down = Enter
ROTARY DIAL POSITIONS
MENU
Rotate the dial to MENU and use the UP or DOWN and ENTER
keys to select the following function for change:
1 Time – Uses “Military” time as standard: 7am = 07:00, 7pm =
19:00
2 Date
3 Aux. Two pages of two lines to display desired parameters not
currently on the rotary dial.
4 O2 Ref.
5 The display’s contrast
6 Header – 2 lines each of up to 16 characters that appear on the
printout. Use ENTER and UP/DOWN.
7 Gross or Net or Condensing Boiler / Furnace efficiency
8 ppm or mg/m
3
9 Report
10 Printing select the PRINTER model KMIRP/KANEIRP-2
11 Service – Password protected for service personal only
When you have selected the function to change, press ENTER to
select.
Repeat this to scroll through the menu and select (using the ENTER
key) and change (using the UP / DOWN keys) the function.
The final, logical ENTER returns you to the main menu display.
To exit the Menu function you can normally rotate the dial to another
position - Unless the final logical ENTER is pressed, no changes are
made.
To Next Page
Loading...
