4
flags (choiceA) | choiceB): Many commands allow a choice of two or more possible entries
(e.g. ON | OFF). For ON/OFF choices, you may also enter YES or NO. Other commands accept one
of several choices (ON | OFF | TO | FROM). Enter the appropriate word to indicate your choice.
callsigns xxxxxx-n: Many commands require a callsign or alias as an argument. These parame-
ters are normally set to Amateur callsigns, however any combination of 6 numbers and/or letters is
permitted. You may optionally include an "extension" (SSID, Secondary Station Identifier) which is
a decimal number between 0 an 15 (inclusive) used to distinguish two or more stations on the air
with the same amateur call. SSIDs of 0 are not displayed by the KAM Plus.
The commands which can used when INTFACE is set to the default NEWUSER, are underlined.
To Next Page
Loading...
