Need help?Do you have a question about the Kantronics KPC-9612 and is the answer not in the manual?
Details firmware version 6.0 features, including DAMA slave mode.
Instructions for connecting the 12VDC power supply.
Instructions for connecting the serial cable to a computer.
Steps to initialize the KPC-9612 and set the callsign.
Details on making the cable for 1200 baud radio connection.
Details for making the cable for 9600 baud radio connection.
General safety and handling precautions for the KPC-9612.
Explains RS-232 communication with computers.
Details on the required 5-wire connection between computer and KPC-9612.
Pin layout and function for the 1200 baud radio connector.
Pin layout and function for the 9600 baud radio connector.
Configuration options for the DB-9 connector.
Configuration options for the DB-25 serial port.
Ways to power the unit using jumpers and ports.
General| Interface | RS-232 |
|---|---|
| Dimensions | 2.25 x 7.25 x 9.25 inches |
| Weight | 2.5 lbs |
| RAM | 32 KB |
| Type | Packet Controller |
| Data Rate | 1200/9600 bps |
| Modes | Packet, KISS |
| Baud Rates | 300, 1200, 2400, 4800, 9600, 19200 bps |
| Processor | Z80 |
| Connectors | DB-9 |
| Mode | Packet, KISS |
| Operating Temperature | 0°C to 50°C |
To Next Page
