Kantronics KPC-9612 User Manual

KPC-9612 Version 5.2 July 19, 1994
54
quence. Your KPC-9612 will now reset, sending you the sign-on message and the command
prompt (cmd:>.
KISS Mode Operation
Some special software requires that your KPC-9612 be placed in KISS Mode. TCP/IP programs
(NET, NOS, JNOS, and others) and some networking software (G8BPQ) require this mode of opera-
tion. To place your KPC-9612 in KISS Mode, you must first have the command prompt (cmd:).
Type INTFACE KISS and press return. You will not see a message or any prompt back from the
KPC-9612. It is now in KISS Mode.
To force your KPC-9612 out of the KISS Mode from a standard terminal program, hold the ALT key
down and type the numbers 192 on the numeric keypad of your keyboard (NOT THE NUMBER
KEYS ABOVE THE KEYBOARD). Release the ALT key. Press and hold the ALT key and type the
numbers 255 on the numeric keypad. Release the ALT key. Repeat the ALT 192 sequence. Your
KPC-9612 will now reset, sending you the sign-on message and the command prompt (cmd:).

Kantronics KPC-9612 Specifications

General

Brand	Kantronics
Model	KPC-9612
Category	Controller
Language	English