EasyManuals Logo

Kantronics KPC-9612 User Manual

Kantronics KPC-9612
81 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #66 background imageLoading...
Page #66 background image
KPC-9612 Version 5.2 July 19, 1994
66
Specifications
Size: 0.8 in. × 6.2 in. × 6.1 in. (2.1 cm × 15.8 cm × 15.5 cm)
Weight: less than 16 oz. (<0.45 kg)
Input Voltage Requirements: 5.5 VDC 25 VDC
Current Requirements: 45 mA (max), <20 mA (idle)
Power plug polarity: Center pin positive
External Carrier detect: Pulldown to ground
PTT and Control Outputs: Open drain (+50 VDC max. and 200 mA max.)
Port 1 Port 2
Watchdog timer: 2.5 min. 30 sec.
Audio Output:
Drive level (lo) 260 mV p-p 2-100 mV p-p
Drive level (hi) 140 mV - 4 V p-p 80 mV - 4 V p-p
Impedance 600 Ohm (ac coupled) 600 Ohm (ac or dc coupled)
Audio Input:
Input Impedance 600 ohm single-ended 100 kOhm ac coupled
Sensitivity 5 mV p-p lo: 25 mV 450 mV p-p
hi: 80 mV 1.6 V p-p
Dynamic range 70 dB 26 dB
Maximum input V 35 V p-p (±12 VDC) 25 V p-p (±25 VDC)
1200 Modulation Port 1: 1200 BPS FSK (Bell 202 - 1200/2200 Hz standard,
CCITT V.23 optional)
9600 Modulation Port 2: Gaussian Filtered DFSK
Modes of operation: Packet, KISS, Host, XKISS
Other features: PBBS, KA-Node, Gateway, cross-connect, remote access

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kantronics KPC-9612 and is the answer not in the manual?

Kantronics KPC-9612 Specifications

General IconGeneral
BrandKantronics
ModelKPC-9612
CategoryController
LanguageEnglish

Related product manuals