18
4.6 CONNECTING TO POWER
Only use the included charger to power and charge the Car DVR.
1. Once the Car DVR is securely installed on your vehicle’s windscreen, plug the
DC Power Plug into your vehicle’s cigarette lighter.
2. Run the power cable along your vehicle’s console and windscreen and plug the
USB Micro plug into the Car DVR and the USB A end into the DC Power Plug.
NOTES:
• It is recommended that the Car DVR is installed behind your vehicle’s rear
view mirror.
• Make sure that the camera view is not obstructed by any window tint or any
other objects.
• The KPT-522 is designed to be constantly powered by the included DC Power
Plug. The internal battery is designed to hold saved settings and power the
camera when in Park Mode. The battery is NOT designed for primary use.
To Next Page
Loading...
