6
NOTES ON INSTALLATION
• It is advised that the Car Dash Cam is installed near the rear view mirror, at
the top centre of the windshield for optimal operation.
• Make sure that the lens is within the range of the windscreen wiper to ensure
a clear view when it rains.
• Do not touch the lens with your ingers. Finger prints left on the lens will result
in unclear videos or photos. If photos or videos are blurred, please clean the
lens gently with a microibre cloth.
• Do not install the device on a tinted window. Doing so may damage the tint
ilm and restrict the Car Dash Camera's recording capabilities.
• It is recommended to install the rear camera near your license plate to provide
an unhindered view from the rear of your vehicle.
• Only use the included cable to power the Car Dash Cam.
• The KPT-522 is designed to be constantly connected to the included power
supply, and is NOT designed to be used solely with the camera’s built in
battery.
1.2 PRODUCT INFORMATION
For latest manual and product updates please visit our website at
www.kapturecam.com.au or www.kapturecam.co.nz
To Next Page
Loading...
