· On Busy: By this option, if the called extension is busy the incoming calls
(Extension, Line or Extension/Line Calls) can be forwarded to defined number in
selected (Day, Night or Day/Night) mode. By this way the incoming call will ring at
the related number defined before, in “Busy” condition according to the system
mode.
· Busy – No Answer: By this option, if the called extension is busy or not answer
within 3 rings, the incoming calls (Extension, Line or Extension/Line Calls) can be
forwarded to defined number in selected (Day, Night or Day/Night) mode. By this
way the incoming call will ring at the related number defined before, in either “Busy”
or “No Answer” condition according to the system mode.
NOTE:
· Extended Call Diversion facility explained above, can be used with AAS or later
software version of ST26. This facility can be only supported in DS Series
Systems with z_adz software version (the version of IDEA and Net-Console
should be BAY and Release AAZ).
· Extended Call Diversion facility can not be canceled with the 866 or 868-coded
program. It can be cancelled through telephone menu. Please note that all
existing call diversions should be cancelled at the same time by dialing 85.
Auto Dial
The telephone automatically calls the corresponding number when the auto-dialer is
activated. If the called party is busy, then the calling action is performed repeatedly in
every 15 seconds. As soon as the busyness of the opposite party is over, the telephone
notifies that by ringing itself or by short beep. This feature can be deactivated by using
the “Cancel” option on the display.
- By selecting the Last Number option, the most recent number that has been
dialed is automatically called.
- When the Private Pool option is activated, the private pool numbers, which have
previously been entered into the memory by the menu “Private Pool Entry”, are
automatically called. The value to be entered here is one of the two-digit private
pool indices in the range 1-9.
- By the Common Pool option, the common pool numbers, who have been stored in
the exchange and whose entries have been done by the operator only are
automatically called.
Paging
In connection with the handsfree feature, pagings in several forms could be done in
order to be heard through the speakers of the telephones while dial tone is being
received.
- Group
- Extension
To Next Page
