decimal values. For each pulse price the call charging can be calculated as
decimal values. The decimal part can be entered after pressing the key “#”.
¨ By the Last Call selection, pricing of the last line, over which the call has been
made is done.
Home Area Code
With this facility, the city code is entered to the phone memory, thus the calling party
number is shown without the city code for local calls, even though the network sends
the city code appended in front of the caller id.
When the facility is selected, there is a cursor which allows maximum 6 digits to be
entered is displayed on the screen. With this cursor the desired “home area code” is
entered and then it is confirmed in order to be saved into the memory of the phone. If
any number, within the defined home area code, is dialled only the number without the
area code is displayed on the screen.
The existing area code (AAA) will be shown on the right side of the display when the
“Home Area Code” menu is entered.
Line Access Code
With this facility, if there is an incoming call that has the Caller ID information and the
“Area Code”, which has been defined before, only the Line Access Code is displayed
instead of the Area Code on the screen, for local calls. In order to realize it, firstly, the
line access code is needed to be entered to the phone and saved into the memory. In
this way, the caller id of the call will will have line access code appended infront.
When the facility is selected, there is a cursor which allows maximum 6 digits to be
entered is displayed on the screen. With this cursor the desired “line access code” is
entered and then it is confirmed in order to be saved into the memory of the phone. If
any number, within the defined home area code, is dialled the number with the line
access code is displayed on the screen.
This facility provides to redial the missed calls within the defined codes with a single
key.
The existing line access code (DD) will be shown on the right side of the display when
the “Line Access Code” menu is entered.
Example:
Suppose that “Home Area Code” and “Line Access Code“ have been defined
successively as “0212” and “9”. If there is an incoming call with “0212 2672030” as
caller id to the phone, since the first three digits of the incoming Caller ID information
has been defined before on to the phone, the defined code “0212” will be erased and
the line access code “9” will be added instead of home area code.
To Next Page
Loading...
