The user will see the number “92672030” through the screen as a call source. When
this calling is got as a missed call by the phone, the user can call this number by
pressing simply the “OK” key. The main purpose of this facility is providing to redial
such a missed call within the defined local area with a single key.
Notes:
- When there is a returning parked call and the telephone is ringing, the caller
ID is displayed together with the access code of line.
- When Last Number Redial option is used, only line access code was
displayed on ST26 display. This is modified so that dialled number is also
displayed.
Enblock
While en-block call is not active and the telephone is on hook, it is switched on in
handsfree mode as soon as a key is pressed, and each digit is transmitted one by one.
On the other hand, after en-block call has been activated, the telephone is switched on
only after all the digits are dialed, and those digits are transmitted in a block.
In order to activate en-block call the facility accessed through this menu needs to be
enabled. Otherwise it needs to be disabled.
To Next Page
