Karma Ergo 2 Series - Page 43

39
Product Model
ERG 3
Total mass (kg)
11.9
12.3
12.2
12.6
12.5
12.9
13.1
13.3
13.4
13.6
13.7
13.9
13.8 14.1 14.4
Mass of the heaviest
part (kg)
8.0
8.4
(Q14)
8.3
8.7
(Q14)
8.6
9.0
(Q14)
8.2
8.4
(Q20)
8.5
8.7
(Q20)
8.8
9.0
(Q20)
8.4
(Q24)
8.7
(Q24)
9.0
(Q24)
10.1
10.5
(F14)
10.4
10.8
(F14)
10.7
11.1
(F14)
11.3
11.5
(F20)
11.6
11.8
(F20)
11.9
12.1
(F20)
12.0
(F24)
12.3
(F24)
12.6
(F24)
Maximum user weight
(kg)
5
115 115 115
115/
125
115/
125
115/
125
115/
125
115/
125
115/
125
Minimum turning
radius (mm)
895 900 910 895 900 910 895 900 910
Minimum turning
radius without user
(mm)
745 750 760 745 750 760 745 750 760
Pivot width (mm)
1115
1135
1155
1115
1135
1155
1115
1135
1155
Static stability downhill
(X°)
14 14 14 14 14 14 14 14 14
Static stability uphill
(X°)
14 14 14 14 14 14 14 14 14
Static stability sideways
(X°)
14 14 14 14 14 14 14 14 14
Handrim diameter
(mm)
N/A N/A N/A 435 435 435 520 520 520
Horizontal location of
axle (mm)
45 45 45 45 45 45 45 45 45
1. Nominal seat width is measured the width of seat cushion at 120 mm in front of the backrest. This value is
mainly used in the product ordering process.
2. Nominal seat depth is measured from the front end of the seat cushion to the back cushion. This value is mainly
used in the product ordering process.
3. Q = Quick-release axles
4. F = Fixed axles
5. The Ergo 3 series is suitable for users up to 125 kg in weight. However, if the wheelchair is equipped with Push &
Pull attendant brake, it is only suitable for users up to 115 kg in weight.
- This wheelchair conforms to the requirements and test methods for static, impact and fatigue
strengths (ISO 7176-8).
- The actual product specifications differ from the data in the table by ±10 mm ±0.5 kg.
- The actual product specifications may vary according to different configurations.
- KARMA reserves the right to modify information herein without further notice.
- Please scan the QR code to watch more instructions of the measurement methods on the
KARMA website.