EasyManuals Logo

Karma KP-20 Series User Manual

Karma KP-20 Series
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #53 background imageLoading...
Page #53 background image
39
7.5 Suggested Maintenance Procedures
7.5.1 Before using the powered wheelchair, make sure all nuts and bolts
are tight.
7.5.2 Check all parts for damage or wear and have a qualified technician
replace it if necessary.
7.5.3 Check all parts for proper adjustment.
7.5.4 Ensure that the batteries are properly maintained and charged as
required.
7.5.5 Inspect brake for proper operation.
7.5.6 The wheels and tires should be checked periodically for cracks and
wear, and should be replaced by a qualified technician.
7.5.7 Regularly check for loose nuts and/or bolts in the front casters and
drive wheels. If loose, have them adjusted by a qualified
technician.
7.5.8 Clean dirt, dust and grease from exposed components.
7.5.9 A qualified technician can be found with an authorized
distributor/dealer.
7.6 Transporting and Storing
7.6.1 The wheelchair may be disassembled for ease of transport.
Please refer to section 5 for more detailed information on the
individual steps. Reverse the order for reassembly.
7.6.2 Please store the wheelchair in a location where it is out of direct
sunlight, rain and dew.
7.6.3 When stored for a long time, please charge the batteries to full
and then disconnect the battery terminals.
7.6.4 For more details, consult your KARMA wheelchair dealer.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Karma KP-20 Series and is the answer not in the manual?

Karma KP-20 Series Specifications

General IconGeneral
BrandKarma
ModelKP-20 Series
CategoryWheelchair
LanguageEnglish

Related product manuals