Karma KP-20 Series User Manual

47
Minimum braking distance from max
speed (mm)
1000
1000
1000
Obstacle climbing (mm)
50
50
50
Ground clearance (mm)
60
60
60
Minimum turning radius (mm)
780
955
1130
Minimum turning radius without user
(mm)
650
825
1000
Reversing width (mm)
1180
1220
1260
Static stability downhill (X°)
16
16
16
Static stability uphill (X°)
14
14
14
Static stability sideways (X°)
16
16
16
Dynamic stability uphill (X°)
6
6
6
Ability to climb rated slope (X°)***
12
12
12
* Nominal seat width is measured the width of seat cushion at 120mm in front of the backrest. This value is
mainly used in the product ordering process.
** Nominal seat depth is measured from the front end of the seat cushion to the back cushion. This value is
mainly used in the product ordering process.
*** Drive range/ Ability to climb rated slope are estimated based on the following conditions: 20℃~35℃, 115
kg occupant, brand new fully charged batteries and driving on the flat road.
- The actual product specifications differ from the data in the table by ±1 cm ±0.5 kg.
- The actual product specifications may vary according to different configurations.
- KARMA reserves the right to modify information herein without further notice.
- If you want to know more about the measurement methods of wheelchair specifications,
please scan the QR code to watch the instructions on the KARMA website.

Karma KP-20 Series Specifications

General

Brand	Karma
Model	KP-20 Series
Category	Wheelchair
Language	English