1 – 18
ᵏ
SAFETY
OBSERVE FOOTING AT SWINGING.
To avoid tipping of the machine in swinging
motion, check the machine footing whether it
is level enough or not.
OBSERVE PRECAUTIONS ON
OPERATION ACROSS TRACKS.
Pay attention to avoid turnover of the machine
when lowering and swinging the boom from the
blade side to either side of the machine at the
same time. Since the width of each track is
shorter than its length, stability is poorer over
side than on the blade side.
On a grade, operate the machine slowly with
the retracted arm in a reduced working radius.
OBSERVE PRECAUTIONS WHEN
OPERATING WITH LONG ARM.
Observe the following precautions to use the
long arm.
c
Do not use any combination of arm and
bucket that we do not specify.
d
Do not use the breaker attachment.
e
Do not lower and swing the boom at the
same time on a soft ground or grade.
Operate the machine slowly with the
retracted arm in a reduced working radius.
To Next Page
Loading...