Kato Imer 17VXE - Warning Signals and Labels

1 – 33
ᵏ
SAFETY
1-12 WARNING SIGNS AND LABELS
There are several specific safty signs on your machine. Their exact location and
description of the hazard are reviewed in this section.
Please take the time to familiarize yourself with these safety signs.
Wake sure that you can read all safety signs. Clean or replace these if you cannot
read the words or see the pictures. When cleaning the labels use a cloth, water and
soap. Do not use solvent, gasolin, etc.
You must replace a label if it is damaged, missing or cannot be read. If a label is on
a part that is replaced, make sure a new label is installed on the replaced part.
See your IHl dealer new labels.
Located warning lavels
3
1
View A
A
2
6
7
9
8
4
5
11
12
5
11
10