Kato Imer 17VXE - Declaration of Conformity

1)
DECLARATION OF CONFORMITY (ORIGINAL)
(Directive 2006/42/EC , Annex II, 1A)
2) Manufacture: KATO IMER S.p.A.
3) Address: località CUSONA - 53037 SAN GIMIGNANO (SI) - ITALY
4) Technical file compiled by: KATO IMER S.p.A. Technical department manager
5) Address: località CUSONA - 53037 SAN GIMIGNANO (SI) - ITALY
6) Hereby we declare that the machine category:
EARTH-MOVING MACHINERY / HYDRAULIC EXCAVATOR
7) Type: 17VXE
8) Serial number:
EG________
9) Net power installed (kW/rpm) : 10.5 / 2300
10) Is in conformity with the provisions of the <<Machinery Directive>> 2006/42/EC, as amended
and the regulations transposing it into national law;
11) Also complies with the provisions “noise emission in the environment by equipment for use
outdoors” directive 2000/14/EC amended by 2005/88/EC and the regulations transposing it into
national law
- Machine category: Hydraulic excavator annex I n°20
- Conformity assessment procedure followed: internal control of production with assessment of
technical documentation and periodical checking, annex VI. (1
st
procedure)
- The notified body : ECO S.p.A. – via Mengolina, 33 – 48018 Faenza (RA) – Italy
- Measured sound power level: L
WA
92 dB
- Guaranteed sound power level: L
WA
93 dB
12) The following respective requirements fulfil: 2014/30/ EC
13) Harmonised EN-standards taken: EN ISO 12100; EN ISO 3744; EN 474 -1; EN 474 -5
14) Place / Date: San Gimignano / …... - …………
…………………………………………
15) Name:
16) Position: President of KATO IMER
S.p.A.