KaVo INTRAmatic 10 ES - Preparation Methods According to ISO 17664; 6 Preparation Methods According to ISO 17664; Preparations at the Site of Use

6 Preparation methods according to ISO 17664
6.1 Preparations at the site of use
WARNING
Hazard from nonsterile products.
An infection hazard exists from contaminated medical devices.
▶ Observe suitable personal protective measures.
▶ Remove residual cement, composite or blood at the site of use.
▶ Dry the medical device to prepare it for transportation.
(Do not place it in a solution, etc.).
▶ Prepare the medical device directly after treatment.
▶ Remove the cutter or grinder from the medical device.
Preparation methods according to ISO 17664 31