KaVo INTRAmatic 10 ES - Care Products and Systems - Servicing: Care with Kavo Spray

Note
KaVo only guarantees that its products will function properly when the care
products are used that are listed as accessories since they were tested
for proper use on our products.
6.5.1 Care products and systems - Servicing: Care with KaVo Spray
KaVo recommends servicing the project twice daily (at noon and in the
evening after hours), after each time the machine is cleaned, and before
each sterilisation.
▶ Remove the cutter or grinder.
▶ Cover the product with the Cleanpac bag.
Preparation methods according to ISO 17664 43