Operating Instructions | KBL Tower space 2000
18
7. Tanning mode
STOP BUTTON
• Stops the tanning session
if pressed for at least two
seconds.
DISPLAY
• Shows the menu items and
functions.
• Indicates the tanning time.
• Information line.
ARROW BUTTONS
• Allows the selection of
subordinate functions.
START BUTTON
• Starts the tanning session during the warm-up
time
• as well as after an interruption caused by pressing
the STOP button, provided that the booked tan-
ning time has not elapsed yet.
Position
recessed button
+/- BUTTONS
• Control the functions.
DANGER
Excessive dose of UV radiation
Excessively prolonged tanning sessions
may cause severe damage to skin and
eyes.
• Never operate the solarium with a defective
timer.
• Observe the tanning times given in the
tanning schedule.
The following explanations and functions refer to a
tanning device that is fully equipped with all features.
7.2 Starting the tanning session
During the tanning session, the door must remain
closed in order to ensure that the ventilation works
properly.
• Close the door and place yourself in the middle of
the tanning device booth, with body positioned an
equal distance form the surrounding lamps.
• Put on protective goggles.
• The tanning session will commence automatically
after the warm-up time controlled by the timer has
elapsed. During the warm-up time, the tanning
session can be started manually at any time by
pressing the START button.
7.3 Operation during the
tanning session
You can control the functions of the tanning device via
the interior control panel during the tanning session.
It is particularly easy for you to access the basic
functions. Buttons with recesses that can easily be
sensed allow for easy operation of the system even
with your eyes closed.
NOTES:
20 seconds after your last input, the interior control
panel changes over to the indication of the tanning
time. An information line at the bottom edge of the
interior control panel informs you about currently
selected features.
To Next Page
Loading...