KBR multisys D2-ESET/MSMT-4 - Resetting the Multisys D2-ESET -4; From Server to Client Operation

V4.00
25833_EDEBDA0290-0622-1_EN
26
Channel 1 settings / Connection.
4.1.9 Resetting the multisys D2-ESET -4
from server to client operation
Example: Server IP address 10.66.22.90
To reset a multisys D2-ESET -4 congured as server to client for „normal“ network
operation, you have to change the parameter in the 1 Channel 1 menu as follows:
Input: telnet 10.66.22.90 9999
Input: Enter (within 2 seconds)
LAN eBus conguration