KBR multisys D2-ESET/MSMT-4 - Menu Item 0 Server, Setting IP Address; Menu Item 1 Channel 1, Setting of Serial Interface (KBR Ebus)

V4.00
25833_EDEBDA0290-0622-1_EN
20
4.1.2 Menu item 0 Server , setting IP address
IP Adress (10) etc.
Example: 10.66.22.98
Set Gateway IP Adress (N) ? N Gateway IP addr ( 0) ( 0) ( 0) ( 0)
Netmask: Number of Bits for Host Part (0=default) (8) Change
telnet cong password (N) N
When entering the netmask, observe the following chart:
Network Class Host Bits Netmask
A 24 255.0.0.0
B 16 255.255.0.0
C 8 255.255.255.0
4.1.3 Menu item 1 Channel 1, setting of serial interface
(KBR eBus)
Baud rate (38400) ? 38400
I/F Mode (7C) ? 7F // the parameters 8 data bits, parity even, 1 stop bit correspond to the
7F coding Flow (00) ?
Port No (10001) ? 8000
All other parameters of this menu item stay the same.!
Change Setup:
0 Server
1 Channel 1
3 E-mail
5 Expert
6 Security
7 Factory defaults
8 Exit without save
9 Save and exit
Your choice ? 9
Parameters stored ...
When entering 9, the changes are saved and accepted.
The multisys 3D2-ESET can now be accessed using the KBR Visual Energy computer
software.
LAN eBus conguration