38 39
ENEN
KBSOUND
®
STARKBSOUND
®
STAR User ManualUser Manual
13204 MIN NORMAL MAX COMMENTS
Measurements 200x53x56 mm
Voltage 85 264 Vac 50/60Hz, terminal F,N
Frequency 47 63 Hz 50/60Hz, terminal F,N
Consumption demand 10 60 W terminals F,N
Output signal
2,5 W terminals L,R (16ohm)
5 W terminals L,R (8ohm)
10 W terminals L,R (4ohm)
Passband 20 20.000 Hz
Auto-power-on level 10 20 Vdc terminals 62, 4
Input Signal 0 3,5 Vrms terminals 65, 66
Distortion 0,3 %
Crosstalk 68 85 dB
13.2 AMPLIFIER
14. FAQ’s
14.1 EQUALIZATION AUDIO MODE
14.2 BLUETOOTH NAME AND PASSWORD
14.3 FM/DAB RECEPTION
14.4 RDS INFORMATION RECEPTION
The equalization audio mode is stored in the MASTER. As a result, the equalization
is the last one set by the most recent user.
We have included in the “Quick Reference Guide” a copy of the label on the MASTER
with the KBSOUND STAR Bluetooth ID and password.
This product has been designed and tested to provide reasonable protection
against harmful interference in residential installation.
Improving the FM/DAB reception: extend the aerial antenna wire and adjust the
angle for best reception. Be sure to locate it as far as possible from any sources
of electrical noise such us halogen or led lamps, HVAC, fluorescent bulbs, etc.
The App is prepared to receive RDS information and show it alongside
the frequency.
However, some FM stations do not send any RDS information. Also, if the FM
reception is poor, although sound can be heard, RDS information may not be well
received. In these cases, no RDS information is shown. To improve it, be sure that
the FM station is sending an FM signal and use an FM antenna.
14.5 RECEIVE A CALL WHEN LISTENING FM/DAB
Take note that the FM/DAB is not paused when the device receives a call.
To Next Page