Need help?Do you have a question about the KEB COMBIVERT 20F5 Series and is the answer not in the manual?
General| Category | Inverter |
|---|---|
| Frequency Range | 0-400 Hz |
| Series | KEB COMBIVERT 20F5 |
| Output Voltage | 0-480 V |
| Control Method | Vector control, V/f control |
| Protection Features | Overcurrent, overvoltage, undervoltage, overtemperature |
| Communication Interfaces | CAN, EtherCAT, PROFIBUS, PROFINET, EtherNet/IP, Modbus RTU, Modbus TCP, POWERLINK |
| Cooling Method | Fan-cooled |
| Ambient Temperature | -10°C to +40°C |
| Storage Temperature | -25°C to +70°C |
| Relative Humidity | 5 to 95% (non-condensing) |
| Enclosure Rating | IP20 |
Explains hazard symbols, their meanings, and associated risks.
Safety precautions for installing the drive converter unit.
Safety instructions for performing electrical connections.
Safety precautions for initial start-up and ongoing operation.
Maintenance work to be carried out periodically by authorized personnel.
Precautions and restrictions for unauthorized repair or modification.
Defines the intended use and lists potential unexpected operating conditions.
Details environmental conditions for storage, transport, and operation.
Specifies temperature, humidity, and altitude limits.
Specifies vibration and shock limits for different conditions.
Details device classification and EMC compatibility.
Classification based on overvoltage category and pollution degree.
Specifications for input voltage, frequency, power, and current.
Input and output specifications for larger device sizes.
Describes overload integrator behavior and lists available accessories.
Details AIC, LCL, and EMC filters required for sinusoidal currents.
Information on DC fuses, including assembly kits and specifications.
Details EMC-compatible installation within a control cabinet.
General instructions for installing the drive converter.
Shows a circuit example for the power unit with AIC/LCL filter.
Shows a circuit example with AIC/LCL and common mode filters.
Details master-slave operation circuit with AIC/LCL and common mode filters.
Illustrates a circuit example for the control connections.
Details the pin assignment of terminal block X2A.
Explains parameter navigation, value changes, and error resetting.
Instructions for dimensioning the COMBIVERT F5 AIC.
Technical data specific to the COMBIVERT F5 AIC devices.
Instructions for installing liquid-cooled drive converters.
Instructions for connecting the drive converter to a cooling system.
Illustrates series connection schemes for master/slave systems.
Illustrates parallel connection schemes for cooling circuits.
To Next Page