Need help?Do you have a question about the KEB COMBIVERT 29F5 Series and is the answer not in the manual?
General| Category | Inverter |
|---|---|
| Series | KEB COMBIVERT 29F5 |
| Protection Features | Overcurrent, overvoltage, undervoltage, overtemperature, short circuit |
| Communication Interfaces | CAN, Ethernet |
| Cooling Method | Forced air cooling |
| Relative Humidity | < 95% (non-condensing) |
| Altitude | Up to 1000 m above sea level (derating may apply above 1000 m) |
Guidelines for installing the drive converter in control cabinets for EMC compatibility.
Details the input terminals on the drive converter and their functions.
Describes the terminal blocks for different housing types of the devices.
Specifies permissible wire cross-sections and terminal tightening torques.
Provides various circuit examples for the drive converter setup.
Explains input and pre-charging circuits for the drive converter.
Instructions for understanding the subsequent circuit example.
Provides a circuit example for the power unit with AIC/LCL filter.
Circuit example for power unit with AIC/LCL filter and common mode filter.
Circuit example for master-slave operation with AIC/LCL and common mode filters.
Describes the control board for F5 AIC devices.
Details the assignment of terminal block X2A on the control board.
Provides guidelines for connecting the control system to prevent malfunctions.
Explains how to use digital inputs with internal or external voltage supply.
Details analog input configurations for setpoint settings.
Shows digital outputs and their current limits.
Explains relay outputs and protective circuits for inductive loads.
Details analog outputs and their specifications.
Describes the voltage output for digital inputs and control elements.
Details operation using the digital operator accessory for local control.
Lists product standards directly applicable to the drive converter.
Safety precautions and guidelines for installing the drive converter.
Safety instructions for electrical connections to the drive converter.
Notes on ensuring EMC-compatible installation.
Safety warnings and precautions for starting up and operating the drive converter.
Safety warnings and guidelines for repairing the drive converter.
To Next Page