Need help?Do you have a question about the KEB COMBIVERT 16F5 Series and is the answer not in the manual?
General| Series | 16F5 |
|---|---|
| Category | Inverter |
| Protection Class | IP20 |
| Enclosure Rating | IP20 |
| Power Range | 0.75 kW to 22 kW |
| Frequency Range | 0-400 Hz |
| Control Method | V/f control, vector control |
| Communication Interfaces | CANopen, Profibus, EtherCAT, Modbus |
| Protection Features | Overcurrent, overvoltage, undervoltage, overtemperature, short circuit |
| Storage Temperature | -25 to +70 °C |
| Relative Humidity | 5-95% (non-condensing) |
| Cooling Method | Internal fan, Push-through mounting (cold plate) |
| Ambient Temperature | -10 to +40 °C |
Explains safety signal words and symbols used in the manual.
Lists product standards directly applicable to the drive converter.
Identifies the intended audience for the instruction manual.
Provides instructions for safe transport, storage, and handling.
Details safety precautions for installing the drive converter.
Outlines safety measures for electrical connections.
Guidelines for installing the unit to meet EMC requirements.
Safety instructions for starting up and operating the drive converter.
Describes required maintenance procedures and schedules.
Safety warnings and guidelines for repairing the unit.
Lists the key features and capabilities of the drive converter.
Specifies necessary components and conditions for operation.
Details intended applications and identifies potential residual risks.
Describes prohibited uses and their consequences.
Details device classification and electromagnetic compatibility.
Specifies device classification for overvoltage and pollution.
Lists EMC emitted interference and immunity requirements.
Describes the overload behavior and error triggering.
Explains how to operate the drive converter using the digital operator.
Details how to operate the drive converter using its keyboard interface.
Explains navigation and input of parameters via keyboard.
Guides on how to reset error messages displayed on the unit.
Describes the password protection system and access modes.
Details the interface operator's functions and connections.
Explains the diagnostic and parameter interface X6B.
Describes the RS232/485 interface and its pin functions.
Guidelines for connecting and configuring the RS485 interface.
Details technical data specific to COMBIVERT F5 AIC devices.
Specifies coolant temperature limits and recommendations.
Warns about moisture condensation and its risks.
To Next Page