Need help?Do you have a question about the KEB COMBIVERT 28F5 Series and is the answer not in the manual?
General| Series | 28F5 |
|---|---|
| Category | Inverter |
| Input Frequency | 50/60 Hz |
| Output Frequency | 0-400 Hz |
| Enclosure Rating | IP20 |
| Input Voltage | 380-480 V AC |
| Output Voltage | 0-480 V AC |
| Power Range | 0.75...400 kW |
| Control Method | V/f control, vector control |
| Protection Features | Overcurrent, overvoltage, undervoltage, short circuit, overtemperature |
| Communication Interfaces | RS485, CANopen, Profibus, Ethernet |
| Operating Temperature | -10°C to +40°C |
| Humidity | 5 to 95% (non-condensing) |
Safety warnings and their meanings.
Guidelines for transport, storage, and mounting.
Specific safety measures during installation.
Safety guidelines for wiring and connections.
Procedures for EMC, voltage, and insulation testing.
Safety measures during initial use and running.
Procedures for servicing and fixing the device.
Key capabilities and operational conditions.
Input, output, and other performance specifications.
EMC setup and general mounting procedures.
Description of input terminals and DC link capacity.
Diagrams of terminal blocks for different housings.
Cross-sections and tightening torques for terminals.
Detailed assignment of terminal block X2A.
Using the keypad to set parameters and reset errors.
Specific data for AIC devices.
To Next Page