Need help?Do you have a question about the KEB COMBIVERT 27F5 Series and is the answer not in the manual?
General| Series | 27F5 |
|---|---|
| Category | Inverter |
| Output Frequency | 0-400 Hz |
| Enclosure Rating | IP20 |
| Input Voltage | 380-480 V AC |
| Power Range | 0.75-630 kW |
| Control Method | V/f control, vector control |
| Protection Features | Overvoltage, undervoltage, short circuit |
| Communication Interfaces | CANopen, Profibus, Ethernet |
| Ambient Temperature | -10 to +40 °C |
| Relative Humidity | 5 to 95 % (non-condensing) |
| Altitude | Up to 1000 m above sea level (derating above 1000 m) |
| Storage Temperature | -25…+70 °C |
Explains signal words and safety signs used in the manual.
Defines the intended audience and required qualifications for the manual.
Safety precautions and guidelines for installing the drive converter.
Safety instructions for connecting the drive converter electrically.
Guidelines for EMC installation and voltage testing precautions.
Instructions and warnings for initial start-up and operation.
Procedures and warnings for maintenance and repair.
Defines intended use, restrictions, and residual risks.
Specifies EMC emitted interference and immunity levels.
Guidelines for installing the drive converter within a control cabinet for EMC.
Explains the function of various input terminals on the drive converter.
Specifies wire cross-sections and tightening torques for terminals.
Describes the functional sequence of the start-up procedure.
Pin assignments and functions for terminal block X2A.
Instructions for operating the drive converter with a digital operator.
How to use the keyboard for parameter and value adjustment.
Detailed technical data for COMBIVERT drive converters.
Specific technical data for COMBIVERT F5 AIC devices.
Guidelines for installing liquid-cooled drive converters.
Guidelines for managing coolant temperature.
Warnings and prevention of moisture condensation.
Diagrams for series connection of cooling circuits.
Diagrams for parallel connection of cooling circuits.
To Next Page