GB - 6
Preface
If single regulations should be or become void, invalid or impracticable, the effectivity of all
other regulations or agreements is not affected.
1.3 Copyright
The customer may use the instruction manual as well as further documents or parts from it for
internal purposes. Copyrights are with KEB and remain valid in its entirety.
1.4 Speciedapplication
The COMBIVERT G6 serves exclusively for the control and regulation of three-phase motors.
The operation of other electric consumers is prohibited and can lead to the destruction of the
unit. Frequency inverter are components which are intended for the installation in electric
systems or machines.
The used semiconductors and components of KEB are developed and dimensioned for the
use in industrial products. If the KEB COMBIVERT F5 is used in machines, which work under
exceptional conditions or if essential functions, life-supporting measures or an extraordinary
safety step must be fullled, the necessary reliability and security must be ensured by the ma-
chine builder. The operation of our products outside the indicated limit values of the technical
data leads to the loss of any liability claims.
1.5 Product description
The product family COMBIVERT G6 has been developed for the universal use at open-loop
three-phase drives. The units are equipped with an integrated EMC lter. This manual descri-
bes only the power circuits.
This accompanying instruction manual contains only information for the installa-
tion and connection of the power circuit KEB COMBIVERT G6.
Further parts of the installation manual are required depending on the ordered
type:
• Connection and adjustments of the control
• Safety function STO
• Safe digital output for f=0Hz
A manual with general safety requirements and EMC conform installation is
available under www.keb.de.
To Next Page
Loading...
