Keba KeContact KC-P30 e Series - Interfaces; Options

KC-P30 Technical data
Installation manual V3.28
55
© KEBA
Relative air humidity: 5 % to 95 % (non condensing)
Altitude: max. 2000 m above sea level
Rate of temperature change: max. 0.5 °C / min
Temperature behavior:
Automatic power reduction if overheating oc-
curs
12.5 Interfaces
Ethernet interface
Ethernet1: LSA+
®
terminals
Data transfer rate: 10/100/1,000 Mbit/s
Ethernet2: RJ45 (for debug)
USB interface
Type: A, USB 2.0 (Hi-Speed)
Max. output power: 500 mA
Enable input
Type: External, potential-free switch contact
Type of terminal: Spring-type terminal
Cross section: 0.08 – 4 mm
2
AWG: 28 – 12
Stripping length: 8 mm
Switch contact output
Type:
External safety extra-low voltage, <50VAC,
50/60Hz
Necessary current limitation: <0.5A
Type of terminal: Spring-type terminal
Cross section: 0.08 – 4 mm
2
AWG: 28 – 12
Stripping length: 8 mm
12.6 Options
4G/LTE mobile network communication
Supported bands:
4G with fallback to 3G/2G
● LTE (4G)
Bands: 1, 3, 8, 20, 28
● UMTS/HSPA+ (3G)
Bands: 1, 8
● GSM/GPRS/Edge (2G)
Dual-band