To Next PageTo Next Page
Need help?Do you have a question about the KeepRite KLP Series and is the answer not in the manual?
Capacity and charge data for medium temperature, 6 FPI models across various refrigerants.
Capacity and charge data for low temperature, 6 FPI models across various refrigerants.
Capacity and charge data for low temperature, 4 FPI models across various refrigerants.
Fan motor electrical specifications for 115V, air/hot gas defrost models.
Fan motor electrical specifications for 208-230V, air/hot gas defrost models.
Fan motor & defrost heater specs for 208-230V electric defrost models.
Fan motor & drain pan heater specs for 115V hot gas defrost models.
Fan motor & drain pan heater specs for 208-230V hot gas defrost models.
Diagrams for 115/1/60 and 208-230/1/60 air defrost models.
Diagram for 208-230/1/60 electric defrost using contactor.
Diagram for multi-evaporator electric defrost systems.
Diagrams for hot gas defrost with alternate fan speed methods.
Benefits and features of the ESP+ evaporator control system.
TXV and solenoid valve recommendations for various models and refrigerants.
Factory valve options for ESP+ models, split by temperature and FPI.
Kits and packages for medium and low temp 6 FPI models.
Kits and packages for low temperature 4 FPI models.
Detailed descriptions of available defrost kit part numbers and their components.
Detailed descriptions of available fuse package part numbers.
Guidelines for inspection, application, location, and mounting of the evaporator.
Procedures for TXV and nozzle selection and installation for optimal performance.
Instructions for drain line installation, heating, and pre-startup checks.
Routine maintenance, system checks, and initial startup procedures.
Schematics for standard reverse cycle and 3-pipe defrost piping.
Schematics for optional defrost configurations, drain pan loops, and solenoid valves.
General| Brand | KeepRite |
|---|---|
| Model | KLP Series |
| Category | Air Conditioner |
| Language | English |
