43
ABDOMINAL
CYLINDER ADJUSTMENT
NOTICE: CYLINDERS ARE FACTORY-ADJUSTED AND REQUIRE NO
FURTHER ADJUSTMENT UNLESS THEY ARE REPLACED. Please contact
KEISER if you have any questions concerning adjustments or repairs.
1. Check the condition of the rubber crutch tips that the exercise arms rest against.
These must not be worn or damaged in any way. If they are worn replace them
before attempting to adjust a cylinder.
2. With the resistance at zero, check the feel of the movement of the machine. If the rod
seems to stick or hesitate at full extension, the piston may be bottomed-out, lengthen
the rod three full turns down (pg. 13 maintenance manual).
To Next Page
Loading...
