4.0 Appendix
4.1 Sources
Velocity
Outputs a value representing the amount of force a key is triggered with. Triggering a key with
more force results in higher values, triggering a key with less force results in lower values.
•
Range: 0-127 (no force to full force)
Velocity (Inverted)
An inverted version of the Velocity source. Triggering a key with more force results in lower values,
triggering a key with less force results in higher values.
•
Range: 0-127 (full force to no force)
Pressure
Outputs the amount of pressure currently being applied to a key. More pressure results in higher
values, less pressure results in lower values. The value will drop to 0 when the key is released.
•
Range: 0-127 (no pressure to full pressure)
Pressure (Inverted)
An inverted version of the Pressure source. More pressure results in lower values, less pressure
results in higher values. The value will go up to 127 when the key is released.
•
Range: 0-127 (full pressure to no pressure)
Tilt
Outputs the amount of bottom-to-top pressure (y-axis) currently being applied to a key. Pressure
more toward the top of the key results in higher values, pressure toward the bottom of the key
results in lower values. The value will return to center (63) when the key is released.
•
Range: 0-127 (bottom to top)
Tilt (Inverted)
An inverted version of the Tilt source. Pressure toward the top of the key results in lower values,
pressure toward the bottom of the key results in higher values. The value will return to center (63)
when the key is released.
•
Range: 0-127 (top to bottom)
Appendix 42
To Next Page
Loading...
Need help?
General