Keith McMillen Instruments 12 Step User Manual

4.2 Message Types
Message Types select what kind of MIDI message the modline will output. Please note that each
message type may only be used once. As soon as it is placed on a modline it will no longer be
available for other modlines. The only exception to this is the CC message type, which may be used
twice.
The following message types are available in the 12 Step Editor:
Note
Outputs a MIDI note.
CC
Outputs values on a specified Control Change (CC) number.
Bend
Outputs values as MIDI pitch bend messages.
•
0 = full bend down
•
63 = center (no bend)
•
127 = full bend up
Channel Pressure
Outputs values as MIDI channel pressure messages.
Poly Aftertouch
Outputs values as MIDI aftertouch messages.
Appendix 44

Keith McMillen Instruments 12 Step Specifications

General

Brand	Keith McMillen Instruments
Model	12 Step
Category	Extender
Language	English