Keithley 2001 Quick Reference Guide

79
:FRESistance
:AVERage
:ADVanced
:NTOLerance?
[:STATe] <b>
[:STATe]?
[:STATe] <b>
[:STATe]?
:AUTO <b>
:AUTO ONCE
:AUTO?
:OCOMpensated <b>
:OCOMpensated?
Query noise tolerance
level.
Enable (1 or ON) or dis-
able (0 or OFF)
advanced filter.
Query state of advanced
filter.
Enable (1 or ON) or disable
(0 or OFF) filter.
Query state of digital filter.
Enable (1 or ON) or disable
(0 or OFF) auto filter.
Enable and then disable
auto filter.
Query auto filter.
Enable (1 or ON) or disable (0
or OFF) Offset Compensa-
tion.
Query Offset Compensation.
:FREQuency
:COUPling AC|DC
:COUPling?
:REFerence <n>
:STATe <b>
:STATe?
:ACQuire
:REFerence?
:DIGits <n>
:DIGits?
:SOURce <name>
:SOURce?
:THReshold
:CURRent
:RANGe <n>
:RANGe?
Path to configure frequency:
Specify input coupling.
Query input coupling.
Specify reference (REL) value
(0 to 15e6).
Enable (1 or ON) or disable
(0 or OFF) REL.
Query state of REL (0 or 1).
Use input signal as refer-
ence.
Query reference (REL) value.
Specify measurement resolu-
tion (4 or 5).
Query resolution.
Select source: CURRent,
VOLTage.
Query source.
Path to configure threshold:
Path to set current threshold:
Specify range (0 to 1).
Query range.
Table 29. Sense command summary (cont.)
Command Description

Keithley 2001 Specifications

General

Model	2001
Category	Multimeter
Manufacturer	Keithley
Type	Digital Multimeter
Digits of Resolution	7.5
DC Voltage Range	100 mV to 1000 V
AC Voltage Range	100 mV to 750 V
Frequency Range	3 Hz to 500 kHz
Connectivity	GPIB, RS-232
Display	VFD
Resistance Accuracy	0.008% + 2.0 mΩ
Frequency Accuracy	±0.01%
DC Current Range	10 μA to 3 A
AC Current Range	10 μA to 3 A
Power Supply	100 V to 240 V AC, 45 Hz to 66 Hz