Keithley 2290-5 - Features; Unpacking and Inspecting; Inspect for Damage; Shipment Contents

Model 2290
-5 5 kV Power Supply User's Manual Section 1:
Introduction
2290-5-900-01 Rev. A/December 2013 1-3
Features
The key features of the Model 2290-5 include:
• High-voltage operation – Source voltages up to a maximum of 5 kilovolts (kV).
• 25 W power capability – Source currents up to 5 milliamps (mA) at 5 kV.
• Ease of use – Digital displays and the keypad simplify setting the voltage and current parameters.
• Programmable voltage limit – Voltage limit can be preset to ensure safe operation.
• Programmable current limits – Current limit and trip point can be preset to prevent possible
equipment damage.
• Output filter – Reduces output ripple and noise.
• Monitor outputs – Provide 0 – 10 V signals that can be used to monitor the high-voltage output
and current.
• External voltage control – Allows the high-voltage output value to be controlled with a 0 – 10 V
input signal.
• Standard IEEE-488 interface – Allows the instrument to be remotely controlled by a personal
computer.
• Safety interlock – Connections to an internal circuit that shuts down the high-voltage output when
an external circuit is opened. The external circuit would typically include a limit switch on a test
fixture door.
Unpacking and inspecting
Inspect for damage
Upon receiving the Model 2290-5, carefully unpack the unit, and inspect for any obvious signs of
physical damage that might have occurred during shipment. Notify the shipping agent of any damage
immediately.
Shipment contents
The following items are included with every Model 2290-5 order:
• Model 2290-5 high voltage power supply
• Model 2290-5 product information CD-ROM
• AC line power cord
• Model 2290-5 additional accessories, as ordered