Keithley DMM7510 Quick Start Guide

Install the instrument
You can use the Model DMM7510 on a bench or in a rack. If
you are installing the Model DMM7510 in a rack, please see the
instructions that came with your rack-mount kit.
To prevent damaging heat build-up and ensure specifi ed
performance, make sure there is adequate ventilation and air
fl ow around the instrument to ensure proper cooling. Do not
cover the ventilation holes on the top, sides, or bottom of the
instrument.
Make sure the instrument is positioned so that it is easy to reach
any disconnecting devices, such as the power cord.
The Model DMM7510 operates from a line voltage of 100 V
to 240 V at a frequency of 50 Hz or 60 Hz. The line voltage is
sensed automatically. Before connecting line power, make sure
the operating voltage in your area is compatible.

Keithley DMM7510 Specifications

General

Brand	Keithley
Model	DMM7510
Category	Multimeter
Language	English