Safety
UnpackIntroduction
FAQs
Next steps
Connect Explore Test
• Where possible, use automatic handlers so operators are not
required to access the DUT or other potentially hazardous
areas.
• Provide training to all users of the system so they understand
all potential hazards and know how to protect themselves
from injury.
• During power up in many systems, the outputs may be in an
unknown state until they are properly initialized. Make sure
the design can tolerate this situation without causing operator
injury or hardware damage.
To keep users safe, always read and follow all safety
warnings provided with each of the instruments in your
system.
To Next Page
Loading...
Need help?
General
