Keithley SourceMeter 2602 Reference Manual

Series 2600 System SourceMeters Reference Manual Common Commands C-3
Return to Appendix C topics 2600S-901-01 Rev. A / May 2006
Script command equivalents
Script command equivalents for the common commands in Table C-1 are
summarized in Table C-2. See Section 12 for details on script commands.
Table C-2
Script command equivalents
Common
command Script command equivalent
*CLS status.reset()
*ESE? print(tostring(status.standard.enable))
*ESE <mask> status.standard.enable = <mask>
*ESR? print(tostring(status.standard.event))
*IDN? print([[Keithley Instruments Inc., Model]]..localn-
ode.model..
[[, ]]..localnode.serialno..[[, ]]..localnode.revision)
*OPC? waitcomplete() print([[1]])
*OPC opc()
*RST reset()
*SRE? print(tostring(status.request_enable))
*SRE <mask> status.request_enable = <mask>
*STB? print(tostring(status.condition))
*TRG N/A
*TST? print([[0]])
*WAI waitcomplete()

Keithley SourceMeter 2602 Specifications

General

Brand	Keithley
Model	SourceMeter 2602
Category	Measuring Instruments
Language	English