2-24 TSP Programming Fundamentals Series 2600 System SourceMeters Reference Manual
2600S-901-01 Rev. A / May 2006 Return to Section 2 topics
Displaying the launch configuration window
A launch is configured from the Run dialog box. As shown in Figure 2-13, use the
tool bar at the top of the Test Script Builder to open the launch configuration win-
dow.
Figure 2-13
Opening the Run dialog box
OR
Click and then click Run in the
drop-down menu.
Click Run and then click Run in the
drop-down menu.
Open the Run window as follows:
Launch configuration - Main tab shown:
(launch configuration)
To Next Page
Loading...
