Series 2600 System SourceMeters Reference Manual TSP Programming Fundamentals 2-37
Return to Section 2 topics 2600S-901-01 Rev. A / May 2006
Importing a project from another workspace
A project (along with its script files) can be imported from another workspace
folder that resides in your file system. This is explained in
Figure 2-22, which
imports a project named KI2602Demo_ASimpleTest. In Step C, use the Browser
to locate the project that you wish to import.
After clicking Finish in the Import window, the project will appear in the Project
Navigator of the Test Script Builder.
Figure 2-22
Importing a project from another workspace folder
Switching workspaces
Perform the following steps to switch to another workspace:
1. At the top of TSB, click File on the toolbar to open the file menu and then click
Switch Workspace to open the Workspace Launcher (
Figure 2-21A).
2. Click the Browse button to open the Select Workspace Directory browser
(Figure 2-21B) and select the workspace folder. TSB will shut down and then
re-open using the selected workspace.
A) Click File to display the drop-down file menu
and click Import to open the Import wizard.
B) In the Import Select box, click Existing TSP
Project From File System and then click Next.
C) In the Import box, select (Ö) the project to be
imported, and then click Finish.
To Next Page
Loading...
Need help?
General
