4 2600-900-01 Rev. A / May 2006
LIst of Illustrations Series 2600 System SourceMeters User’s Manual
3 Test Script Processor Interaction
Figure 3-1 Pulse-measure cycle for the PulseVMeasureI function.................. 3-3
Figure 3-2 Importing a factory script project from the Series 2600.................. 3-7
Figure 3-3 KIGeneral project imported into the Test Script Builder ................. 3-9
Figure 3-4 Run configuration example - Main tab ......................................... 3-11
Figure 3-5 Run configuration example - Script Attributes tab ....................... 3-12
Figure 3-6 LabVIEW source step example.................................................... 3-15
Figure 3-7 GUI after loading the non-function script (GPIB).......................... 3-18
Figure 3-8 GUI after running the non-function script (GPIB) ......................... 3-19
Figure 3-9 GUI after loading and running the function script (GPIB)............. 3-21
Figure 3-10 GUI after calling the function (GPIB) ............................................ 3-23
4 Controlling Multiple SourceMeters (TSP-Link)
Figure 4-1 TSP-Link connections .................................................................... 4-2
Appendix Figure Title Page
B Frequently Asked Questions
Figure B-1 Digital I/O port terminals................................................................ B-3
Figure B-2 Triggering a scanner ..................................................................... B-5
Figure B-3 Stacking channels for higher voltage .......................................... B-10
Figure B-4 Connecting channels in parallel for higher current....................... B-11
Figure B-5 Contact check connections ......................................................... B-12
To Next Page
Loading...
