Series 2600 System SourceMeters User’s Manual Remote Operation 2-17
Return to In this Section: 2600S-900-01 Rev. A / May 2006
Using VISA
Clicking on the “Run with VISA” button will send the same commands to the
Series 2600 using NI VISA. The VISA resource is for an instrument at address 26
connected to GPIB interface #1. Once again, a Keithley Instruments GPIB card
was used for this example. However, VISA allows the same code to be used with
GPIB cards made by other manufacturers, or with altogether different interfaces
such as the RS-232 or the Ethernet.
To Next Page
Loading...
Need help?
General
