Series 2600 System SourceMeters Reference Manual Getting Started 1-3
Return to Section 1 topics 2600S-901-01 Rev. A / May 2006
Organization of manual sections
While viewing the PDF version of this manual, the manual sections can be viewed
by clicking the “Bookmarks” tab on the left side of this window. This tab also
provides direct links to the various sections and section topics.
The manual sections are also listed in the Table of Contents located at the
beginning of this manual.
General information
Warranty information
Warranty information is located at the front of this manual. Should your Series 2600
require warranty service, contact the Keithley Instruments representative or
authorized repair facility in your area for further information. When returning the
instrument for repair, be sure to fill out and include the service form at the back of
this manual to provide the repair facility with the necessary information.
Contact information
If you have any questions, please contact your local Keithley Instruments
representative or call one of our Application Engineers at 888-Keithley (534-8453)
or 800-552-1115 (U.S. and Canada only). You can also contact Application
Engineering online at www.keithley.com.
Safety symbols and terms
The following symbols and terms may be found on the instrument or used in this
manual:
The
!
symbol on an instrument indicates that the user should refer to the
operating instructions located in the manual.
The symbol on the instrument shows that high voltage may be present on the
terminal(s). Use standard safety precautions to avoid personal contact with these
voltages.
The symbol on an instrument shows that the surface may be hot. Avoid
personal contact to prevent burns.
The WARNING heading used in this manual explains dangers that might result in
personal injury or death. Always read the associated information very carefully
before performing the indicated procedure.
To Next Page
Loading...
Need help?
General
