Keithley SourceMeter 2611 User Manual

Series 2600 System SourceMeters User’s Manual Test Script Processor Interaction 3-21
Return to In this section: 2600S-900-01 Rev. A / May 2006
to the function when it is called. Figure 3-9 shows the GUI (Graphical User
Interface) after loading and running the script. Note that the Data text box does
not contain any readings as in the previous example; it simply indicates that the
“MeasCurr(ntimes)” function has been created.
function MeasCurr(ntimes)
local l_i -- Local counter variable
reset()
display.screen = display.SMUA
display.smua.measure.func = display.MEASURE_DCAMPS
smua.source.func = smua.OUTPUT_DCVOLTS
smua.source.autorangev = smua.AUTORANGE_ON
smua.source.levelv = 5
smua.source.limiti = 0.1
smua.measure.rangei = 0.1
smua.measure.nplc = 1
smua.source.output = smua.OUTPUT_ON
for l_i = 1, ntimes do
print(smua.measure.i())
end --for
smua.source.output = smua.OUTPUT_OFF
end --function
print("Function 'MeasCurr(ntimes)' created")

Keithley SourceMeter 2611 Specifications

General

Brand	Keithley
Model	SourceMeter 2611
Category	Measuring Instruments
Language	English