Kelly Ebike Brushless DC Motor Controller User’s Manual V 3.3
the fault codes will disappear and the max output
phase current will return to normal.
The Red LED flashes once at power on, then keeps off for normal operation. “1, 2”
means it flashed once, then flashes twice after 1 second. The time between two flashes is
0.5 second. The pause time between one error code and another error code is 2 second.
Contact Us:
Kelly Controls, LLC
Home Page:
http://www.KellyController.com
E-mail:
Support@KellyController.com
Phone:
(001) 224 637 5092
To Previous Page
Loading...
Need help?
General
