Kemppi MasterCool 10 User Manual

MASTER MLS™ 2500, 2503, 3500, 3503, MASTERTIG MLS™ 3000, 3003, 4000, 4003 / 0606– 19© KEMPPI OY
Power source overheat indicator light is lit.
Power source is overheated.
• Check that there is enough free space behind the machine for cooling air circulation.
• Check cooling unit for water circulation, clean cooling unit filter and air grate. Add cooling
liquid if necessary.
For further information and assistance, contact your nearest Kemppi service workshop.
4.3. DISPOSAL OF THE MACHINE
Do not dispose of electrical equipment together with normal waste!
In observance of European Directive 2002/96/EC on Waste Electrical and Electronic
Equipment and its implementation in accordance with national law, electrical equipment
that has reached the end of its life must be collected separately and returned to an
environmentally compatible recycling facility. As the owner of the equipment, you should
get information on approved collection systems from our local representative.
By applying this European Directive you will improve the environment and human
health!
5. ORDERING NUMBERS
Master MLS™ 2500 6104250
Master MLS™ 2503 6102250
Welding cable 35mm², 2,5 m 6184301
Earth cable 25mm², 2,5 m 6184311
Electric plug 16 A, 5-poles 9770812
Master MLS™ 3500 6104350
Master MLS™ 3503 6102350
Welding cable 50mm², 2,5 m 6184501
Earth cable 50mm², 2,5 m 6184511
Electric plug 16 A, 5-poles 9770812
Mastertig MLS™ 3000 6114300
Mastertig MLS™ 3003 6112300
Torches
TTC 160 4m 627016004
TTC 160 8m 627016008
TTC 160 16m 627016016
TTC 220 4m 627022004
TTC 220 8m 627022008
TTC 220 16m 627022016
Earth cable 35mm², 5 m 6184311
Electric plug 16 A, 5-poles 9770812
Gas flow meter AR/clock 6265136
Mastertig MLS™ 4000 6114400
Mastertig MLS™ 4003 6112400
Torches
TTC 160 4m 627016004
TTC 160 8m 627016008
TTC 160 16m 627016016

Kemppi MasterCool 10 Specifications

General

Brand	Kemppi
Model	MasterCool 10
Category	Welding System
Language	English