Kemppi MasterTig 335ACDC User Manual

MasterTig 235ACDC, 325DC, 335ACDC, 425DC
Operating manual - EN
2.4 Installing particle filter (optional)
The optional particle filter is installed together with an additional filter frame as a pack.
1. Place the filter into the filter frame
2. Install the filter pack in front of the air inlet on the rear of the power source.
© Kemppi
12
1920900 / 2052

Kemppi MasterTig 335ACDC Specifications

General

Brand	Kemppi
Model	MasterTig 335ACDC
Category	Welding System
Language	English