4
MasterTig ACDC 3500W© Kemppi Oy 2021 R01
OPERATING MANUAL
1.2 Product introduction
Mastertig AC/DC is a power source for TIG/MMA welding
suitable for AC and DC welding and designed for
demanding professional use. The power source is an
inverter, which is formed with IGB transistors. The power
source is available in 350 A. Three dierent exchangeable
panel versions are available for the power source: a
basic panel, a minilog panel and a pulse panel.The arc
measurement cable between the power source and the
wire feeder (included in the cable set) is connected, but
the arc measurement clamp from the wire feeder to the
workpiece is disconnected.
ACDC
ACDC Minilog
ACDC Pulse
To Next Page
Loading...
Need help?
General
