Kemppi Minarc 220 - General View of the Machine; Distribution Network

EN
environment and protect it from sand and dust during use and storage.
The recommended operating temperature range is -20 to +40 degrees
centigrade. Site the machine so that it does not come into contact with hot
surfaces, sparks and welding spatter. Make sure the airow to and from the
machine is unrestricted.
2.2 GENERAL VIEW OF THE MACHINE
1.2.
3.
4.
1. MMA welding cable
2. Earthing cable and earthing clamp
3. Main switch
4. Mains cable
2.3 DISTRIBUTION NETWORK
All regular electrical devices without special circuits generate harmonic
currents into distribution network. High rates of harmonic current may cause
losses and disturbance to some equipment.
5
Minarc 220 / © Kemppi Oy / 1117