Kemppi MinarcMig 180 User Manual

MinarcMig™ Adaptive 180
© Kemppi Oy 0640 17
3.5.5. Adjustments in manual mode
In manual mode, the wire feed speed and welding voltage are both adjusted
separately. Welding current and power are dened according to wire feed
speed. The desired arc and welding properties can be reached by adjusting the
voltage.
3.6. THREADING THE SHOULDER STRAP
Figure 3.9. Threading the shoulder strap in place
The machine is delivered with a shoulder strap which helps carrying the
machine. Thread the shoulder strap in place according to the picture.
NOTE! The machine should not be hung up from the shoulder strap.
EN

Kemppi MinarcMig 180 Specifications

General

Brand	Kemppi
Model	MinarcMig 180
Category	Welding System
Language	English